List of 13 system certification

[Wu Feiyu]

ISO9001 quality management system
ISO9001 standard is a universally applicable thing, which does not mean that 9000 standard is omnipotent, but because 9001 is a basic standard and the essence of western quality management science, because it is applicable to production-oriented enterprises, service industries, intermediary companies, sales companies, etc. Because quality is common.

ISO14001 environmental management system
ISO14001 environmental management system certification is applicable to any organization, including enterprises, institutions and relevant government units. After passing the certification, it can be proved that the organization has reached the international level in environmental management, which can ensure that the control of various pollutants in various processes, products and activities of the enterprise meets the relevant requirements, and establish a good social image for the enterprise. Through the implementation of the environmental management system, pollution prevention and continuous improvement can be fundamentally realized. At the same time, it can promote the process of enterprises developing clean products, adopting clean processes, adopting efficient equipment, and reasonably disposing of waste. Through the control of the consumption of various resources, it can comprehensively optimize its own cost management.

ISO45001 occupational health and safety management system
Iso45001 is an international safety and health management system verification standard and a new version of the original occupational health and safety management system (OHSAS18001), which aims to reduce and prevent the loss of life, property and time caused by accidents and damage to the environment through management.
We usually call ISO9001, ISO14001 and iso45001 three systems together as three systems (also known as three standards). These three system standards are applicable to all walks of life.

GB/T50430 engineering construction quality management system
All construction engineering enterprises engaged in the construction of waterproof, anti-corrosion and thermal insulation projects, building decoration and decoration projects, fire-fighting facilities projects, building curtain wall projects, electronic and intelligent projects, municipal utilities, petrochemical projects, electromechanical projects, building electromechanical installation projects, environmental protection projects, steel structure projects, construction projects and other construction projects related to construction qualifications must have corresponding qualification certificates, It includes gb/t50430 building construction system.

ISO27001 information security management system
– Industries with information as their lifeline: 1. Financial industry: banking, insurance, securities, funds, futures, etc. 2. Communication industry: telecommunications, Netcom, China Mobile, China Unicom, etc. 3. Bag Companies: foreign trade, import and export, HR, headhunting, accounting firms, etc
– Industries with high dependence on Information Technology: 1. Steel, semiconductor, logistics 2. Electric power, energy 3. Outsourcing (ITO or BPO): it, software, telecom IDC, call center, data entry, data processing, etc.
– High technological requirements and what competitors desire: 1. Medicine and fine chemicals 2. Research institutions can coordinate all aspects of information management by introducing information security management system, so as to make management more effective. Ensuring information security is not just a firewall, or finding a company that provides information security services 24 hours a day. It requires comprehensive and integrated management.

ISO20000 information technology service management system
ISO20000 is the first international standard on the requirements of IT service management system. It adheres to the concept of “customer-oriented and process centered”, and emphasizes the continuous improvement of the IT services provided by the organization according to the methodology of PDCA (Deming quality). Its purpose is to provide a model for establishing, implementing, operating, monitoring, reviewing, maintaining and improving the IT service management system (ITSM). ISO 20000 certification is suitable for it service providers, which can be internal IT departments or external service providers, including (but not limited to) the following categories: 1. It service outsourcing provider 2. It system integrators and software developers 3. Internal IT service provider or it operation support department.

ISO22000 food safety management system
ISO22000 food safety management system certificate is one of the necessary certificates for feed processing, primary product processing, food production, circulation, storage and catering industries. It also serves as the standard basis for the organization’s second-party audit of its suppliers.

HACCP hazard analysis and critical control point system
HACCP system is a preventive food safety control system that evaluates the hazards that may occur in food processing links, and then takes control. Mainly for food production enterprises, aiming at the health and safety of the whole process of the production chain (responsible for the life safety of consumers). Although both ISO22000 and HACCP systems belong to the ranks of food safety management, there are differences in the scope of application: ISO22000 system is applicable to food and related industries, while HACCP system can only be applied to food and closely related operational links.

IATF 16949 automobile quality management system standard
Enterprises suitable for iatf16949 system certification include manufacturers of cars, trucks, buses, motorcycles and parts and accessories. Enterprises that are not suitable for iatf16949 system certification include: vehicle manufacturers in industry (forklift), agriculture (pickup truck), construction industry (engineering vehicle), mining, forestry, etc. For enterprises with mixed production, only a few products are provided to automobile manufacturers, and iatf16949 certification can also be done. All management of the company should be carried out in accordance with iatf16949, including automotive product technology. If the production site can be distinguished, only the automobile product manufacturing site can be managed according to iatf16949, otherwise the whole factory must be implemented according to iatf16949. Although the mold product manufacturer is the supplier of the automobile supply chain manufacturer, the products provided are not used for automobiles, so it cannot apply for iatf16949 certification. Similarly, there are transportation suppliers, automobile related products after automobile sales, etc.

ISO13485 medical device quality management system
ISO13485 is called “requirements of medical device quality management system for regulations” in Chinese. Because medical devices are special products that save the dying and heal the wounded, prevent and treat diseases, it is not enough to regulate them only according to the general requirements of ISO9000 standard. Therefore, ISO has issued iso13485:1996 standards (yy/t0287 and yy/t0288), which put forward special requirements for the quality management system of medical device manufacturers, It has played a good role in promoting the quality of medical devices to achieve safety and effectiveness

Applicable to: medical product manufacturers and service providers that fulfill the requirements of international, European and national laws and regulations, and enterprises that want to implement a documented management system according to this standard. Enterprises that develop, manufacture and sell medical equipment want to show their competitiveness and performance in the international, European and domestic markets. Suppliers and other service providers in the value-added chain must ensure that their products are consistent with customer requirements.

After sales service certification of goods
Applicable to: enterprises manufacturing tangible goods, enterprises selling tangible goods, and enterprises providing intangible goods (services). Commodities are products that enter the field of consumption. Besides tangible products, commodities also include intangible services. Both industrial products and consumer goods belong to commodities. Tangible goods have appearance, internal quality and promotional elements, such as quality, packaging, brand, shape, style, tone, culture, etc. Intangible goods include labor and technical services, such as financial services, accounting services, marketing planning, creative design, management consulting, legal consulting, program design, etc. Intangible goods generally occur with tangible goods, but also with tangible infrastructure, such as air services, hotel services, beauty services, etc. Therefore, production, trade and service enterprises can apply for commodity after-sales service certification.

CMA inspection and testing organization qualification
Qualification confirmation
CMA is the qualification identification mark of inspection and testing institutions, which is composed of the English abbreviation CMA of China inspectionbody andlaboratory mandatory approval.

CNAs Laboratory Accreditation
CNAs is the English abbreviation of China National Accreditation Service for conformity assessment.

[Author]

Posts