[Charlotte DAS]

1. Check function
That is, according to the requirements of technical standards and specifications, carry out multi-level inspection and experiments on raw and auxiliary materials, in-process products, semi-finished products, finished products, equipment, tooling, etc., so as to avoid putting unqualified products into production or transferring them to the next process or leaving the factory, so as to ensure the quality and play the role of “check”. Only through inspection and strict control, can the quality of products be ensured, such as non-conforming raw materials are not put into production, non-conforming semi-finished products are not transferred, and non-conforming finished products are not delivered.

2. Prevention function
The function of preventing and reducing products that do not meet quality standards can be realized through the following activities:
a. First article inspection and patrol inspection.
b. Incoming inspection, intermediate inspection and completion inspection.
c. Measurement of process capability and use of control chart.

3. Reporting function
The reporting function is also the function of information feedback. Record, analyze, master and evaluate the actual quality level of products by recording, analyzing, mastering and evaluating the original data obtained from quality inspection. The report is fed back to the management decision-making department and relevant management departments in the form of report, so as to make correct judgments and take effective decision-making measures. The reporting function provides necessary information for cultivating quality awareness, improving design, strengthening management and improving quality.

[Charlotte DAS]

The biggest thing is making sure the gpu is compatible, CAM doesn’t need much CPU at all but I tried on an old laptop with integrated graphics and failed.

You can sometimes get good milspec laptops on ebay for cheap. The specs are low but much more protected against dust and shock.

[Author]

Posts